Skip to content

SCHEDULE

SPECIALS

CALL US

Toilet Repair & Replacement

Toilet Repair and Replacement in Greater Hartford, CT

Boisvert Plumbing & Mechanical Services repairs and replaces residential toilets across Greater Hartford. We fix the toilet you have when it’s worth fixing, we install a new one when it’s not, and we’ll set a toilet you bought yourself if that is the way you want to go. Licensed, insured, and rated A+ by the Better Business Bureau.

Most toilet problems are a worn part, not a failed fixture. A flapper, a fill valve, a supply line and a wax ring are all inexpensive, and all four are common enough that our trucks carry them. What they are not is obvious from the symptom, which is why the diagnosis comes first.

If you smell sewage, see water spreading across the bathroom floor, or the bowl is overflowing, call now and we’ll come out.

Take Advantage of This Limited Time Special!

Why Is My Toilet Running, Leaking, or Not Flushing?

A toilet that runs constantly, leaks at the base, or flushes weakly almost always has one bad part, and the part is different in each case. A running toilet is usually the flapper or the fill valve inside the tank. Water at the base is usually the wax ring or the closet bolts underneath. A weak flush is usually mineral buildup in the rim jets or a chain adjusted wrong. It’s important to have a plumber take a look because the same three symptoms also show up when the problem is the drain line or the floor under the toilet.

Here is what each symptom usually means:

  • The toilet keeps running, or refills on its own
    A worn flapper no longer seals, so water leaks past it into the bowl and the fill valve keeps filling the tank. It’s the cheapest repair on this page and the most expensive one to ignore, because it runs twenty-four hours a day on a metered bill.

  • Water on the floor around the base
    The wax ring under the toilet has failed, or the closet bolts have loosened and the bowl is no longer sealed to the flange. If the toilet also rocks when you sit down, the flange itself is often the real problem. On Hartford-area houses of a certain age, that flange is likely corroded cast iron, which is why tightening the bolts or swapping the wax ring on its own doesn’t hold.

  • It flushes weakly, or you have to flush twice
    Mineral scale blocks the small rim jets under the bowl rim, or the flush chain is set too long.

  • One bad flush and the bowl backs up
    A single fixture clog clears with an auger at the toilet. If a nearby tub or floor drain gurgles when you flush, or more than one fixture is slow, the restriction is further down the line and that is a drain cleaning call instead.

  • The tank or bowl is cracked
    A hairline crack in porcelain doesn’t get repaired. Replace it before it opens up.
  • Higher water bill with nothing visibly wrong
    A toilet can leak into its own bowl silently. If MDC bills your water, they publish a free twenty-minute test for this, and we walk through it on our leak detection page.

Should You Repair or Replace Your Toilet?

Repair the toilet if the tank parts are worn, the wax ring failed, or the flush is weak, and replace it if the porcelain is cracked, the flange or floor underneath has gone, or the toilet predates 1994. Parts are cheap and a good toilet lasts decades, so repair is the right answer more often than not.

Federal law capped new toilets at 1.6 gallons per flush in 1994, so the age of the fixture tells you what it costs to run. If MDC bills your water, the volume charges come to $8.78 for every 748 gallons once the Clean Water Project Charge is counted. For a family of four, against a 1.28 gallon WaterSense model:

Toilet installedGallons per flushExtra cost per year
Before 19805.0 or moreAbout $319
1980 to 19943.5About $190
1994 to 20101.6About $27

One of our customers put it this way in July: “Excellent work provided. My toilet drain and installation were done quick and neatly.”

Signs It's Time for a New Toilet

  • Any crack in the tank or the bowl, however small

  • The toilet rocks, or the flange underneath has corroded through

  • Water at the base keeps coming back after a new wax ring

  • It takes two flushes to clear the bowl

  • Stains and scale that no longer come clean

  • Installed before 1994, so 3.5 gallons or more per flush

Should You Buy Your Own Toilet, or Have Us Supply It?

Either works, and the choice mostly comes down to whether you want to choose the fixture yourself. We install toilets we supply and toilets our customers buy, and the labor is the same job either way.

What actually drives the price. Three things: how much of the toilet has actually failed, whether anything under it needs work once the old one comes up, and whether the shutoff valve and supply line are still serviceable. A shutoff that won’t close means the water has to come off further back before the toilet can even be removed. Boisvert gives you a written estimate before any work starts, so the number doesn’t move once the truck is in the driveway.

If You Buy the Toilet

Measure the rough-in before you buy anything. That is the distance from the finished wall behind the toilet to the center of the closet bolts. It’s 12 inches in most homes but 10 or 14 inches in plenty of older Greater Hartford bathrooms.

Before we arrive, have ready:

  • The toilet, still boxed, and the seat if it did not come with one
  • The rough-in measurement
  • A clear path to the bathroom

We supply the wax ring, bolts and supply line.

If We Supply the Toilet

One visit, one invoice, and one place to go if something is wrong afterward. We bring a toilet sized to your rough-in, and the old fixture leaves with us.

Worth telling us in advance:

  • Whether anyone in the house would be better served by a taller bowl
  • Whether you want elongated or round, if the space allows it
  • Whether the bathroom has ever had a floor or subfloor issue

If the flange or the floor under the toilet needs attention, we will show you before we set the new bowl.

How Can We Help?

Our Services

We provide homeowners and business owners in Central Connecticut and the Greater Hartford Area with expert plumbing, HVAC, water heaters, boilers, sewer solutions and more. From system upgrades to energy-efficient solutions, we deliver reliable comfort and trustworthy results. Reach us 24/7!

Preferred HVAC & Plumbing Service Provider

Why Choose Boisvert

  • Skilled Technicians Highly trained & qualified technicians. CT licenses: PLM.0282249-P1, HTG.0405214-S1, ELC.0204306-E1.
  • 24/7/365 Service Expert service when you need it the most.
  • Quality Work We always stand by the quality of our work.
  • Exceptional Warranties Parts & labor on new installations.
  • Special Offers We offer our customers opportunities to save.

How Can We Help You?
Request Appointment:

Ready to Get Started?

Contact Us for Expert Service

You can rest assured knowing that our team will stand by their work and we strive to earn your trust. We treat you like our family. Contact us today for expert service!

  • 01 Call or Fill Out The Form
  • 02 Request Date & Time
  • 03 Get Service Fast!